Deposit Ethereum to Play ClubGG — Three Networks, Different Economics
Deep Poker accepts ETH three ways. On the Ethereum mainnet (ERC20) for real on-chain ETH with L1 security. On Arbitrum (L2) for native ETH at pennies per transfer with Ethereum-grade security via rollup. Or via BEP20 as Binance-Peg ETH on BNB Smart Chain — sub-minute confirmations, near-zero fees, backed by Binance's 1:1 custody.
$1 minimum. Zero platform fees. No KYC. Same 6-tier rakeback ladder (25%–50%) regardless of which rail you pick. This page walks through when to use each, the gas-in-ETH chicken-and-egg that trips up first-timers, and the honest trade-off between ETH and stablecoin deposits.
No phone number. No KYC. Native ETH on L1, L2, or the Binance-peg version — you pick.
ETH on Deep Poker — at a glance
Three networks, three fee profiles, three confirmation times — upfront.
| Networks accepted | ERC20 (Ethereum L1) · Arbitrum (L2) · BEP20 (Binance-Peg ETH on BSC) | Three rails — native ETH on L1 and L2, plus the Binance-wrapped version on BNB Smart Chain. Pick based on where your ETH already lives. |
| ERC20 fee (Ethereum mainnet) | $3–$30+ during congestion | Paid in ETH. Highly variable — moves with mainnet gas. Cheap at quiet hours (under $3), expensive during mint waves, NFT drops, or market volatility ($30+). |
| Arbitrum fee (L2) | $0.03–$0.30 | Paid in ETH on Arbitrum. Includes a small L1 data-posting component that moves with Ethereum gas but stays dramatically cheaper than mainnet. |
| BEP20 fee (Binance-Peg ETH) | ~$0.20–$0.80 | Paid in BNB on BSC. Stable fee profile, rarely moves even during congestion. Gas is paid in BNB (not ETH), so a BSC wallet with ETH but no BNB can't send. |
| ERC20 confirmation time | 3–10 minutes | |
| Arbitrum confirmation time | 2–5 minutes | |
| BEP20 confirmation time | Under 1 minute | |
| Deep Poker platform fee | $0 | |
| Minimum deposit | $1 equivalent | In practice, ERC20 mainnet fees make sub-$100 deposits wasteful. Use Arbitrum or BEP20 for smaller amounts; save ERC20 for larger sends where the fee is a small percentage. |
| KYC | Not required |
The three-network decision
Each network trades cost against security and speed differently. Match the network to the size of your deposit, where your ETH already lives, and how quickly you need the credit.
| Network | Gas paid in | Typical fee | Confirmation | Best for |
|---|---|---|---|---|
| ERC20 (Ethereum L1) | ETH on mainnet | $3–$30+ | 3–10 min | Large deposits, ETH stuck on L1, users holding mainnet ETH for other L1 activity |
| Arbitrum (L2) | ETH on Arbitrum | $0.03–$0.30 | 2–5 min | Default for cost-conscious native-ETH users, DeFi-native wallets, anyone already on Arbitrum |
| BEP20 (Binance-Peg ETH) | BNB on BSC | ~$0.20–$0.80 | Under 1 min | Users with ETH already on BSC, smallest fastest transfers, anyone comfortable with Binance's peg layer |
Pick ERC20 when…
- Your ETH is already on Ethereum mainnet and moving it elsewhere first would cost more than one mainnet send.
- You're depositing a large amount where a $10–$30 gas fee is a small percentage.
- L1-level trust-minimization matters to you for this specific transfer.
Pick Arbitrum when…
- You want Ethereum-grade security without mainnet gas.
- Your ETH is already on Arbitrum from DeFi.
- You're withdrawing from an exchange that supports Arbitrum (most now do).
- Default recommendation for most players, most of the time.
Pick BEP20 when…
- You already hold Binance-Peg ETH on BSC from a Binance withdrawal.
- You want sub-minute confirmation and the simplest fee economics.
- You're comfortable adding Binance's wrapping layer on top of ETH's native characteristics.
The gas-in-ETH wrinkle — what trips up first-timers
ETH has a characteristic that catches new self-custody users off guard: on Ethereum mainnet and Arbitrum, you pay gas in ETH. You're sending ETH and paying ETH for the privilege. That creates a chicken-and-egg that doesn't exist on most other deposit coins.
The specific problem
Imagine your wallet holds 0.05 ETH on Ethereum mainnet — about $175 at current prices — and you want to deposit it. During congestion, the gas fee might be 0.01 ETH (about $35). Your wallet has enough ETH to pay the fee and enough ETH to send the remainder, but only just barely. If the fee rises before you sign, the transaction may fail or eat more of your balance than you expected.
Why it's rarely a real issue
Exchange withdrawals side-step the problem entirely. When Binance sends you 0.05 ETH on Arbitrum, they're sending from their own hot wallet with abundant gas — they just debit your account the 0.05 ETH and charge a small flat fee. You receive a clean 0.05 ETH in your wallet. From there, if you want to send that ETH, you need a tiny amount on top for gas — even $3 of ETH covers dozens of Arbitrum transfers.
The BSC exception
On BEP20 the gas token is BNB, not ETH. So a BSC wallet with Binance-Peg ETH but no BNB can't send that ETH anywhere — you need a small amount of BNB on BSC for gas first. The separation makes the math easier in one way (you don't have to reserve ETH for gas) and harder in another (you need to hold two tokens instead of one).
BEP20 ETH — what Binance-Peg means in this context
Ethereum isn't native on BNB Smart Chain. What's labeled “ETH” on BSC is Binance-Peg ETH, a BEP20 token issued by Binance and backed by real ETH held in Binance's custody on a 1:1 basis. The pattern is identical to BEP20 BTCB (Binance-Peg Bitcoin) and BEP20 USDC (Binance-Peg USD Coin).
The economics track real ETH.BEP20 ETH trades at the same USD value as native ETH, moves with the same price action, and is redeemable for native ETH through Binance's unwrap flow. The peg has held consistently throughout multi-year operation of BSC.
The trust layer differs.Native ETH on Ethereum or Arbitrum has no issuer — it's just the Ethereum protocol. BEP20 ETH is issued by Binance against reserves they hold in custody. If Binance's reserve process failed, BEP20 ETH could decouple from native ETH. In practice this has not happened, but it's the meaningful difference between the three rails.
For a Deep Poker deposit, all three options credit the same USD-denominated Deep balance. The choice is about cost, speed, and comfort with the additional trust layer — not about the value received.
ETH vs stablecoins — the deposit choice
ETH isn't stable against USD. Stablecoins are. The trade-off between the two as a deposit vehicle is fundamental, not a network question.
| Dimension | ETH | USDT / USDC |
|---|---|---|
| Price behavior from deposit to play | Floats with the market — $100 of ETH today may be $95 or $110 of chips tomorrow | Stable — $100 of USDC/USDT is $100 of chips, modulo rare depeg events |
| Suitable hold duration | Hours to days — short-horizon poker sessions limit exposure to price swings | Days to weeks — stablecoin holdings don't move meaningfully with market |
| Gas token for native transfers | ETH itself — chicken-and-egg if wallet holds ETH but no ETH for gas (rare in practice) | Separate (ETH on Ethereum/Arbitrum, BNB on BSC) — wallet needs gas token separately |
| Issuer trust layer | None — ETH is a native asset with no issuer | Circle (USDC) or Tether (USDT) — plus wrapping layer for BEP20 |
| Networks supported on Deep | 3 (ERC20, Arbitrum, BEP20) | USDT: 5 networks. USDC: 2 networks (Arbitrum, BEP20) |
| Why you'd pick this | You already hold ETH, you're comfortable with short-window price exposure | You prefer dollar-denominated stability, longer holds, simpler accounting |
Practical answer:if you already hold ETH and your session is short (hours), deposit ETH. The price-exposure window between transfer and credit is small, and converting to stable first costs a swap fee you don't need to pay. If you're planning to leave a balance on Deep for days or weeks before playing, or you want predictable dollar accounting, use a stablecoin. The difference is when, not whether.
How to deposit ETH to Deep Poker
Eight steps. The critical ones are steps 2 and 4 — pick the network at Deep's screen, then send from your wallet on the exact same chain.
- Create your Deep Poker account.
deep.poker/register. Email plus password. No phone, no KYC. Under a minute.
- Pick your network — ERC20, Arbitrum, or BEP20.
In the Deep panel, Deposit → ETH. Three options: Ethereum mainnet (for real on-chain ETH on L1), Arbitrum (for native ETH on the L2), or BEP20 (for Binance-Peg ETH on BNB Smart Chain). Pick based on where your ETH already lives.
- Copy the deposit address.
All three networks use the same 0x-prefixed EVM address format. The same address string routes differently depending on chain. Copy the full address and confirm the network label on Deep's screen matches the network you'll send from.
- Switch your wallet to the right chain.
MetaMask / Rabby: Ethereum Mainnet (chain ID 1), Arbitrum One (42161), or BNB Smart Chain (56). Binance/Coinbase: pick the matching network in their withdraw dropdown. Getting this wrong is the most common deposit error on ETH specifically.
- Confirm you have gas.
ERC20 and Arbitrum: you need a small amount of ETH on that chain for gas. BEP20: you need a small amount of BNB on BSC. From an exchange, gas is covered on their side. From self-custody, ensure gas is present before attempting the send.
- Send, verify fee, confirm.
Paste Deep's address, enter the amount, review the fee. ERC20: fee can be significant; consider waiting for quieter mempool if non-urgent. Arbitrum and BEP20: fees are small enough to not matter to the decision.
- Wait for confirmations.
ERC20: 3–10 minutes typical. Arbitrum: 2–5 minutes. BEP20: under a minute. Paste your TXID into etherscan.io, arbiscan.io, or bscscan.com to watch the transfer in real time.
- Your Deep Poker balance updates.
Deep credits automatically once the required confirmations are in. The amount is converted to USD at the mid-market rate at credit time. Transfer chips into any ClubGG, PPPoker, or PokerBros club you have access to. Every hand earns rakeback — 25% at Bronze up to 50% at Legend.
Sending from specific wallets and exchanges
All three Deep networks for ETH are well-supported across serious EVM wallets and major exchanges. Here's the specifics for the common ones.
MetaMask
All 3 networksSwitch network: Ethereum Mainnet (chain ID 1) for ERC20, Arbitrum One (42161) for L2, BNB Smart Chain (56) for BEP20. Send ETH → paste Deep's address → confirm. You need gas in the respective chain's native token: ETH (mainnet/Arbitrum) or BNB (BSC).
For BEP20, make sure you're sending Binance-Peg ETH specifically — MetaMask may show multiple 'ETH'-labeled tokens on BSC. The Binance-Peg ETH token address is the widely-used one; verify on BscScan before first send.
Binance
All 3 networksWallet → Withdraw → ETH → network dropdown: choose ETH (mainnet) for ERC20, Arbitrum One for L2, or BSC (BEP20) for the Binance-Peg version. Paste Deep's address → confirm with 2FA.
Binance's withdrawal fees vary by network. ERC20 is usually 0.0015 ETH+, Arbitrum is typically ~$1, BSC is near-zero. Pick based on cost and urgency.
Coinbase / Coinbase Wallet
ERC20 + ArbitrumSend ETH → select network (Ethereum Mainnet or Arbitrum One) → paste Deep's address → choose fee tier if applicable → confirm. Coinbase doesn't support BEP20 ETH withdrawals; if you need BEP20, withdraw to another exchange that does.
Coinbase's default Arbitrum withdrawal is clean and fast. For non-urgent ERC20 withdrawals, picking the lowest fee tier saves meaningful gas during normal market conditions.
Rabby Wallet
All 3 networksSwitch to the appropriate chain (Ethereum, Arbitrum, or BSC), open ETH, Send → paste address → confirm. Rabby's pre-sign preview is especially useful for ETH because it shows the exact chain and fee before signing — catches wrong-network sends before funds move.
Trust Wallet
All 3 networksSelect ETH (pay attention to the network badge — Ethereum, Arbitrum, and Binance Smart Chain show distinct logos). Send → paste address → confirm. Each network has independent ETH balances in the wallet.
Ledger / Hardware wallets
All 3 networksConnect to MetaMask, Rabby, or Ledger Live. Switch to the appropriate chain. ETH → Send → paste Deep's address → approve on the device. The Ledger shows the chain, amount, and destination — verify all three before pressing both buttons.
Hardware wallets handle ETH cleanly on all three Deep-accepted networks. The device-level chain display catches network mix-ups that pure software wallets can miss.
Arbitrum bridge (bridge.arbitrum.io)
Arbitrum onlyNot a wallet, but the official path to move ETH from mainnet to Arbitrum for the first time. Connect your wallet, select ETH, bridge amount, confirm. L1 → L2 deposits land in ~10 minutes; L2 → L1 withdrawals have a 7-day challenge window.
Useful one-time setup if you hold mainnet ETH and want to deposit via the cheaper Arbitrum route. After bridging, subsequent sends to Deep happen directly on Arbitrum without re-bridging.
Troubleshooting — the common ETH problems
I sent ETH on the wrong network
All three Deep ETH networks use the same 0x hex address format. Mainnet ETH sent on Arbitrum lands on Arbitrum; Arbitrum ETH sent on BSC lands on BSC at Deep's 0x address. Contact Deep support immediately with the TXID and the chain — Deep controls the destination address on all three networks and can often recover.
“Insufficient funds for gas”
Self-custody wallet without enough native gas token. On mainnet or Arbitrum, you need ETH on that exact chain. On BSC (BEP20), you need BNB. Even $5 of the gas token covers dozens of transfers. If you have ETH on mainnet but are trying to send on Arbitrum, the mainnet ETH doesn't count — you need ETH bridged to Arbitrum.
Mainnet transaction stuck in pending
Low gas price for the current mempool. Your wallet may support “speed up” (increase gas) or “cancel” (submit a replacement). Check etherscan.io to see your transaction and the current gas levels. If your fee is below the next-block median, expect a wait until mempool congestion drops.
Arbitrum sequencer unavailable
Rare but real — Arbitrum's sequencer has had occasional brief outages. During an outage your transaction may hang until the sequencer recovers. Historically these outages have been measured in hours, not days. If you're mid-outage, wait before re-broadcasting — resending can cause double-spend issues when the sequencer comes back online.
Explorer shows confirmed, Deep balance hasn't updated
ERC20: allow up to 15 minutes past the first confirmation (Deep waits for a few blocks on L1). Arbitrum: allow 5–10 minutes past sequencer confirmation. BEP20: 2–5 minutes. If the delay exceeds 30 minutes on any network, open a Deep support ticket with your TXID and account email.
Someone on Telegram offered to handle my ETH deposit
Block them. Deep Poker never DMs users about deposits. See how to verify a ClubGG agent and the helper-intercept pattern for the full scam taxonomy.
Withdrawing ETH — same SLA, any network
Every network Deep accepts for deposits, it pays out on. ETH withdrawals on ERC20, Arbitrum, and BEP20 all sit in Deep's standard SLA — 1 hour typical, 24 hours absolute maximum. The destination receives the ETH within a few minutes of Deep signing the payout on-chain.
Unlike many licensed operators, Deep does not enforce closed-loop — your deposit coin and your withdrawal coin are independent choices. You can deposit ETH on mainnet and withdraw to BEP20, or vice versa, as long as both sides are among Deep's supported options.
- Minimum withdrawal: $10 equivalent.
- Maximum withdrawal: none — including jackpot-size wins.
- Platform fee: zero.
- Destination: any valid 0x address on the chosen network.
- KYC: not required.
How your ETH deposit fits into rakeback
Your deposit coin and network have no effect on rakeback. ETH on any of three networks, USDT on any of five networks, BTC on native or BEP20, USDC on Arbitrum or BEP20 — every rail credits the same Deep balance, and every hand earns rakeback at the same published ladder.
Deep Poker pays rakeback from your first hand: 25% at Bronze, climbing through Silver, Gold, Platinum, Diamond, and Legend at 50%. Tiers are lifetime cumulative — they never reset. Payouts are weekly, automatic, in USD to your Deep balance.
See the full 6-tier rakeback ladder → or run the rakeback calculator.
Related Reading
Crypto Deposit Hub
All 8 supported coins, decision helper, the full crypto deposits overview.
BTC Deposit Guide
The other non-stablecoin option — native Bitcoin or BEP20 BTCB, different chain architecture.
USDC Deposit Guide
The stablecoin alternative if you want $1 pegged value, also on Arbitrum or BEP20.
USDT Arbitrum Guide
Same Arbitrum rail as native ETH on L2 — in USDT form, with stablecoin mechanics.
Withdrawal SLA
1 hour typical, 24 hours maximum — the published ceiling on every withdrawal.
Rakeback Ladder
25% from your first hand, 50% at Legend — 6-tier USD ladder, weekly automatic payouts.
Frequently Asked Questions
Is ETH on Arbitrum the same as ETH on Ethereum mainnet?
Economically yes, technically they're the same asset on different layers. Ethereum mainnet (L1) is the base chain; Arbitrum is a Layer 2 that settles back to mainnet. ETH bridged to Arbitrum via the official bridge is the same Ether with the same value — just moved to the L2 for cheaper transactions. One ETH on Arbitrum can be moved back to mainnet at any time through the bridge (7-day challenge window) or via faster third-party bridges.
What's BEP20 ETH exactly?
Binance-Peg ETH. Ethereum itself isn't native on BNB Smart Chain — what you see labeled 'ETH' on BSC is a BEP20 token issued by Binance, backed by native ETH held in Binance custody 1:1. Same economic exposure as real ETH, different rails (BSC instead of Ethereum), with an extra trust layer (Binance's wrapping). For Deep Poker deposit purposes, the value matches; the trust model has an additional step.
Which network should I use for a $50 ETH deposit?
Not ERC20. Mainnet gas fees typically run $3–$30, and at the high end that's a 60% haircut on a $50 deposit. Use Arbitrum (fees of a few cents) or BEP20 (fees under $1) for smaller amounts. Save ERC20 for deposits where the fee is a rounding error — usually $500+ and only if you already hold ETH on L1.
I have ETH on Ethereum but want cheap deposits. What's the path?
Two options. Bridge once to Arbitrum via bridge.arbitrum.io (or a third-party bridge like Across), then deposit on Arbitrum. The one-time bridge cost plus subsequent Arbitrum sends is almost always cheaper than multiple ERC20 sends. Alternative: move ETH to an exchange (Binance, Coinbase) and withdraw directly to Arbitrum in one step. The exchange handles the 'bridge' internally at a lower cost than a user-initiated L1 bridge.
Why doesn't Deep accept ETH on Polygon or Base?
Network support comes from where the user base actually holds ETH. Polygon, Base, Optimism, and zkSync all have meaningful ETH liquidity but concentrated in different user segments. Deep currently supports the three networks with the highest overlap between Deep's user base and the ETH they hold: ERC20 (L1), Arbitrum (L2), and BEP20 (Binance-Peg). Adding other networks requires operational support that comes online as the user base shifts.
Does Deep accept ETH's Layer 2s besides Arbitrum?
Not today. Arbitrum is the only L2 Deep operates on for ETH. Optimism, Base, zkSync, Scroll, Linea, and others are not currently accepted. If your ETH is on another L2, you'd either need to bridge to Arbitrum (via bridge.arbitrum.io or a third-party router like Across) or route through a centralized exchange that handles the network conversion.
What happens if I send ETH on the wrong network?
All three Deep networks use the same 0x hex address format, so the ETH leaves your wallet on whichever chain you were signed on. ERC20 ETH sent on Arbitrum lands on Arbitrum; Arbitrum ETH sent on BSC lands on BSC. If this happens in a Deep Poker context, contact support immediately with the TXID and the chain — Deep controls the destination address on all three networks and recovery is often possible. Speed matters because of chain-finality timing.
What's the gas token on each network?
Ethereum mainnet (ERC20): ETH. Arbitrum: ETH on Arbitrum (same token, different chain). BSC (BEP20): BNB. If you're self-custody and want to send ETH on ERC20 or Arbitrum, your wallet needs ETH on that specific chain for gas — ETH on Ethereum mainnet doesn't cover Arbitrum gas. If you're sending BEP20 ETH, your BSC wallet needs BNB (not ETH) for gas. From a centralized exchange, gas is handled internally.
Is Lightning Network an option for Ethereum? What about state channels?
Lightning is Bitcoin-specific; it doesn't apply to ETH. The Ethereum ecosystem uses Layer 2s (Arbitrum, Optimism, zkSync) and state-channel protocols instead, which scale mainnet at different tradeoffs. Deep Poker accepts Arbitrum (an L2) but not state-channel protocols or other L2s currently. If you want to deposit ETH cheaply, Arbitrum is the active path today.
Can I deposit ETH to ClubGG directly?
No. ClubGG is a social-gaming app and doesn't handle real-money crypto. On Deep Poker, your ETH deposit lands in your own Deep balance in USD terms (converted at mid-market rate at credit time), from which you transfer chips into any ClubGG, PPPoker, or PokerBros club you have access to.
What happens to ETH's price between my deposit and my play?
Deep credits your balance in USD terms at the rate at credit time. Once credited, your balance is denominated in dollars — it doesn't move with ETH's price anymore. So: the ETH price moves matter between you initiating the transfer and Deep confirming credit (a 5–15 minute window typically). Once the balance is in USD, you're insulated from ETH movement. Many players hold ETH in their own wallet for longer and deposit only the session-size amount when they're about to play.
Can I withdraw winnings in ETH?
Yes. Every network Deep accepts for deposits, it pays out on. ETH withdrawals on ERC20, Arbitrum, and BEP20 all sit in Deep's standard SLA — 1 hour typical, 24 hours absolute maximum. Minimum $10 equivalent. No maximum. Zero platform fees. Pick your destination network independently from how you deposited.
Does Deep Poker require KYC for ETH deposits?
No. Deep does not require KYC for deposits, play, or withdrawals — regardless of coin or network. Email registration is the only step.
ETH vs USDT/USDC for poker deposits — how should I decide?
If you want price stability, use a stablecoin. $100 of USDT deposited is $100 of chips regardless of when you sit down. If you already hold ETH and don't want to convert to stable first, deposit ETH — the credit-time conversion is a snapshot, not ongoing exposure. If ETH drops 5% between your transfer and Deep's credit, your chip value lands 5% lower; if it rises, higher. For short holding periods (hours to days) the difference is usually small; for longer holds, stablecoins remove the variance.
What's the difference between native ETH on Arbitrum and Arbitrum's ARB token?
Completely different assets. Native ETH on Arbitrum is Ether bridged from Ethereum mainnet — the same currency, moved to the L2. ARB is Arbitrum's governance token, issued by the Arbitrum DAO, used for protocol governance. Deep accepts native ETH on Arbitrum, not ARB. If your wallet shows both, the Send flow for 'ETH' moves Ether; ARB is a separate token.
Deposit ETH. Three networks. Your choice of security, speed, and fee.
$1 minimum. Zero platform fees. No KYC. Same rakeback ladder regardless of which rail you pick.
Deposit ETH on Deep Poker now